How to setup TM Unifi Maxis P1 PPPoE on DIR-820L

STEPS:

Connect Your PC (Laptop) to the Router (Port 1,2,3 either one of them) using Network cable.

Launch your IE (Internet explorer) and key in 192.168.0.1 in the address column and press Enter.
Enter your Username: admin and no password (if it is default) click on Log In
You will see a D-Link configuration page, click on Setup > Internet > Manual Internet Connection Setup.
For My Internet Connection select Unifi-PPPoE (Username / Password)
Address Mode: Dynamic IP Username: Username provided by your ISP Password: Password provided by your ISP
Under VLAN Bridge, please select the correct ISP profile, by default is TM Unifi.
Click on Save setting to complete internet setup

tm